Elapp Power Private Limited

Copper bonded rods are made of high tensile mild steel with a 250-micron copper coating. An additional clamp is required for connecting the wire at the threaded part on top. The working efficiency of this product is really good. Due to its durability and very low maintenance requirements, it has become very popular earthing or grounding equipment.

Advantages:

After the copper earthing rod, Copper bonded rod is one of the best earthing products. There are several advantages of using it

• The efficiency is almost similar to copper

• The resistivity is also good

• The cost is a little less than the pure copper earthing electrode.

• Life span is long.

• The durability is also impressive.

• It requires very little maintenance.

Copper bonded rods are made of high tensile mild steel with a 250-micron copper coating. An additional clamp is required for connecting the wire at the threaded part on top. The working efficiency of this product is really good. Due to its durability and very low maintenance requirements, it has become very popular earthing or grounding equipment.

Advantages:

After the copper earthing rod, Copper bonded rod is one of the best earthing products. There are several advantages of using it

• The efficiency is almost similar to copper

• The resistivity is also good

• The cost is a little less than the pure copper earthing electrode.

• Life span is long.

• The durability is also impressive.

• It requires very little maintenance.

Pre-welded Copper Bonded Rod is manufactured by Electrogrip and marketed by Elapp Power Private Limited. These rods are made of high tensile mild steel with a 250-micron copper coating. For wiring connection, a copper bonded strip is welded in this product and that is why it is named as a pre-welded copper bonded rod, so there is no need for an additional clamp that is needed for normal copper bonded rod. 

Advantages:

The pre-welded copper bonded rod is one of the best earthing products. There are several advantages of using it

• The resistivity is good.

• The efficiency is almost similar to copper

• The cost is less than the pure copper earthing electrode.

• Long life span.

• No additional clamp is needed, unlike normal copper bonded rods. 

• Impressive durability.

• It requires very little maintenance.

Pre-welded Copper Bonded Rod is manufactured by Electrogrip and marketed by Elapp Power Private Limited. These rods are made of high tensile mild steel with a 250-micron copper coating. For wiring connection, a copper bonded strip is welded in this product and that is why it is named as a pre-welded copper bonded rod, so there is no need for an additional clamp that is needed for normal copper bonded rod. 

Advantages:

The pre-welded copper bonded rod is one of the best earthing products. There are several advantages of using it

• The resistivity is good.

• The efficiency is almost similar to copper

• The cost is less than the pure copper earthing electrode.

• Long life span.

• No additional clamp is needed, unlike normal copper bonded rods. 

• Impressive durability.

• It requires very little maintenance.

Copper bonded rods are made of high tensile mild steel with a 250-micron copper coating. An additional clamp is required for connecting the wire at the threaded part on top. The working efficiency of this product is really good. Due to its durability and very low maintenance requirements, it has become very popular earthing or grounding equipment.

Advantages:

After the copper earthing rod, Copper bonded rod is one of the best earthing products. There are several advantages of using it

• The efficiency is almost similar to copper

• The resistivity is also good

• The cost is a little less than the pure copper earthing electrode.

• Life span is long.

• The durability is also impressive.

• It requires very little maintenance.

The technical standards which need to be considered include, but not limited to the following:

• BS 7430: 1999 British Standard Code of Practice for Earthing
• IEEE 80 Guide for Safety in AC Substation Grounding
• Electricity Association Technical Specification (EA TS) 41-24
• Electricity at Work Regulations 1989
• Electricity Supply Regulations 1988

Earthing Specification Supply And Installation:-

17mm x 3 meter Copper Bonded Rod 250 micron CPRI tested pre-welded with connection clamp on top 10*50*5. Highly conductive earthing mix compound with Carbon content more than 65 percent as per IS:1350, Sulphur content les than 0.4 percent as per ISO 46893 and tested for resistivity as per IEC 62561-7 and ASTM G57-06 for resistivity of 0.05 ohms.

Applications :

Used in different sectors such as:

• Lightning Protection system
• Commercial
• Residential
• Power generation

• Based on globally accepted technology
• very cost effective
• Easy to install
• Uniformed coating thickness and stable performance

Technical Specification:

The technical standards which need to be considered include, but not limited to the following:

• BS 7430: 1999 British Standard Code of Practice for Earthing
• IEEE 80 Guide for Safety in AC Substation Grounding
• Electricity Association Technical Specification (EA TS) 41-24
• Electricity at Work Regulations 1989
• Electricity Supply Regulations 1988

Additional Information:

• Item Code: CBR-18
• Packaging Details: Product Specified, Standard Packaging is done.

UL Listed Copper Bonded Rod distributor, supplier and wholesaler in Chile, China & Christmas Island...

IS 3043 / IEEE: 80
BS: 7430
IEC: 60364 - 5
IEC: 62561 - 7
ASTM: G57 - 06

The technical standards which need to be considered include, but not limited to the following :-

• BS 7430: 1999 British Standard Code of Practice for Earthing
• IEEE 80 Guide for Safety in AC Substation Grounding
• Electricity Association Technical Specification (EA TS) 41-24
• Electricity at Work Regulations 1989
• Electricity Supply Regulations 1988

• Low maintenance
• Corrosion resistant
• Easy to install

Earthing Specification Supply And Installation:-

17mm x 3 meter Copper Bonded Rod 250 micron CPRI tested pre-welded with connection clamp on top 10*50*5. Highly conductive earthing mix compound with Carbon content more than 65 percent as per IS:1350, Sulphur content les than 0.4 percent as per ISO 46893 and tested for resistivity as per IEC 62561-7 and ASTM G57-06 for resistivity of 0.05 ohms.

Additional Information:

• Item Code: CBR-08
• Packaging Details: Product Specified, Standard Packaging is done

This Electrogrip set has an Electrogrip copper bonded rod along with a bag of Electrogrip BFC Gem. Copper bonded rods are made of high tensile mild steel with a 250-micron copper coating. An additional clamp is required for connecting the wire at the threaded part on top. The working efficiency of this product is really good. Due to its durability and very low maintenance requirements, it has become very popular earthing or grounding equipment.

Back fill compound provides the resistivity of only 0.24 ohm-m. This white powdered compound consists of several conductive components. It helps the leakage current to flow without any hindrance. The anti-corrosive property of this earth enhancing compound also protects the GI earthing electrode from corrosion.

Advantages:

• The set has complete maintenance free chemical earthing products.

• BFC enhances the resistivity of the soil.

• BFC allows the leakage current to flow in a better way.

• BFC helps to retain moisture to maintain a certain resistivity of the soil.

• BFC has anti-corrosive, which makes the longevity of the earthing product.

• The resistivity is good.

• The efficiency is almost similar to copper

• The resistivity is also good

• The cost is a little less than the pure copper earthing electrode.

• Life span is long.

• The durability is also impressive.

• It requires very little maintenance.

Note: Prices mentioned here are for Bulk Quantity, the price may vary according to your requirement.

This Electrogrip Combo has 1 piece of Electrogrip Pre welded Copper Bonded Rod Along with a 1 bag of Electrogrip BFC Gem of 25 kgs. The Pre welded copper bonded rod is made of hi tensile steel with a 250 micron of copper coating. With a diameter of 16mm, the length of this rod can be customised, either 2 meters or 3 meters. As the name suggests, it has a copper strip with factory made holes for the connection purpose. Like normal copper bonded rods, these pre welded copper bonded rods do not need any additional clamp. 

Back fill compound provides the resistivity of only 0.24 ohm-m. This white powdered compound consists of several conductive components. It helps the leakage current to flow without any hindrance. The anti-corrosive property of this earth enhancing compound also protects the GI earthing electrode from corrosion.

Advantages:

• The set has complete maintenance free chemical earthing products.

• BFC enhances the resistivity of the soil.

• BFC allows the leakage current to flow in a better way.

• BFC helps to retain moisture to maintain a certain resistivity of the soil.

• BFC has anti-corrosive, which makes the longevity of the earthing product.

• The resistivity is good.

• The efficiency is almost similar to copper

• The cost is less than the pure copper earthing electrode.

• Long life span.

• No additional clamp is needed, unlike normal copper bonded rods. 

• Impressive durability.

• It requires very little maintenance.

Copper bonded rods are made of high tensile mild steel with a 250-micron copper coating. An additional clamp is required for connecting the wire at the threaded part on top. The working efficiency of this product is really good. Due to its durability and very low maintenance requirements, it has become very popular earthing or grounding equipment.

Advantages:

After the copper earthing rod, Copper bonded rod is one of the best earthing products. There are several advantages of using it

• The efficiency is almost similar to copper

• The resistivity is also good

• The cost is a little less than the pure copper earthing electrode.

• Life span is long.

• The durability is also impressive.

• It requires very little maintenance.