Call 08048985859 88% Response Rate

our range

New Items

Electrogrip 17mm 3 Meter Prewelded Copper Bonded Rod

Electrogrip 17mm 3 Meter Prewelded Copper Bonded Rod

Rs 3,400  / PieceGet Best Price

Minimum Order Quantity: 1 Piece

Length Of Rod3 meters
Thickness250 microns (coating)
Usage/ApplicationMaintenance Free Chemical Earthing
MaterialCopper
Diameter16 mm
Service LifeUp to 5 to 7 years
BrandElectrogrip
Country of OriginMade in India

Electrogrip Pre welded Copper Bonded rods are made of high tensile mild steel with a 250-micron copper coating. With a length of 3 meters, it has a diameter of 16 mm. For wiring connection, a copper bonded strip is welded in this product and that is why it is named as a pre-welded copper bonded rod. So, there is no need for an additional clamp that is needed for a normal copper bonded rod. Here in Elepp Power Private Limited we check the quality and efficiency of every product for best performance.

Advantages:

The pre-welded copper bonded rod is one of the best earthing products. There are several advantages of using it

  • The resistivity is good.

  • The efficiency is almost similar to copper

  • The cost is less than the pure copper earthing electrode.

  • Long life span.

  • No additional clamp is needed, unlike normal copper bonded rods. 

  • Impressive durability.

  • It requires very little maintenance.

 

Note: Prices mentioned here are for Bulk Quantity, the price may vary according to your requirement.



Additional Information:

  • Production Capacity: 5000 Earthing Rods per month
  • Delivery Time: 24- 48 hrs

View Complete details

get quote request a call back
Electrogrip 3 Meter 250 Micron Prewelded Copper Bonded Rod

Electrogrip 3 Meter 250 Micron Prewelded Copper Bonded Rod

Rs 1,750  / PieceGet Best Price

Minimum Order Quantity: 1 Piece

Length Of Rod3 meters
Thickness250 microns (coating)
Usage/ApplicationMaintenance Free Chemical Earthing
MaterialCopper
Diameter16 mm
Service LifeUp to 12 years
BrandElectrogrip
Country of OriginMade in India

Pre-welded Copper Bonded Rod is manufactured by Electrogrip and marketed by Elapp Power Private Limited with a length of 3 meters. These rods are made of high tensile mild steel with a 250-micron copper coating. For wiring connection, a copper bonded strip is welded in this product and that is why it is named as a pre-welded copper bonded rod, so there is no need for an additional clamp that is needed for normal copper bonded rod. 


Advantages:

The pre-welded copper bonded rod is one of the best earthing products. There are several advantages of using it

  • The resistivity is good.

  • The efficiency is almost similar to copper

  • The cost is less than the pure copper earthing electrode.

  • Long life span.

  • No additional clamp is needed, unlike normal copper bonded rods. 

  • Impressive durability.

  • It requires very little maintenance.


Note: Prices mentioned here are for Bulk Quantity, the price may vary according to your requirement.  

 



Additional Information:

  • Production Capacity: 5000 Earthing Rods per month
  • Delivery Time: 24 hrs

View Complete details

get quote request a call back
Chemical Earthing Electrode

Chemical Earthing Electrode

Rs 1,299  / PieceGet Best Price

Minimum Order Quantity: 1 Piece

Length Of Rod3 meters
Thickness100 microns
Usage/ApplicationMaintenance Free Chemical Earthing
MaterialGalvanized Iron (GI)
Diameter40 mm
Auger Hole8 - 10 inches
Terminal Hole8mm
Service Life7-10 Years
CertificationCPRI Certified
Country of OriginMade in India
Galvanised iron is used here as a primary material to construct this product. The length of the material can be 2 meters or 3 meters and there are a lot of options you will get while choosing the diameter of the electrode such as 40mm, 50mm 60mm, 80mm, 100mm and 110mm. As it is a galvanised iron rod there is a zinc coating of up to 100 microns as per your requirements and also the coating slows down the corrosion process and can work properly for around 6-7 years. The structure consists of two gi pipes and a plate and the gap is filled with a special kind of conductive chemical.

Advantages:

There are several advantages of using a GI or Galvanised Earthing Electrode, 

  • The cost is less than the copper electrode.

  • The corrosion process is comparatively slower than a normal iron rod.

  • It lasts for more than 6-7 years.



Additional Information:

  • Production Capacity: 5000 Earthing Electrodes per month
  • Delivery Time: 24 hrs

View Complete details

get quote request a call back
Galvanised Iron Earthing Electrode

Galvanised Iron Earthing Electrode

Rs 1,299  / PieceGet Best Price

Minimum Order Quantity: 1 Piece

Length Of Rod2 meters
Coating ThicknessUpto 80 Microns
Thickness2mm
MaterialGalvanized Iron (GI)
Usage/ApplicationMaintenance Free Chemical Earthing
Diameter50mm
Packaging TypePlastic Wrap
ColorSilver
Auger Hole8 - 10 inches
Terminal Hole8mm
Product TypeIron
Finishing TypeGalvanized iron
Terminal Size50mm x 6mm
CertificationCPRI Certified
Service Life7 - 10 years
ShapePipe
BrandElectrogrip
Country of OriginMade in India
GI earthing electrode is one of the electrical products that are manufactured by Electrogrip and marketed by Elapp Technologies Private Limited. Galvanised iron is used here as a primary material to construct this product. The length of the material can be 2 meters or 3 meters and there are a lot of options you will get while choosing the diameter of the electrode such as 40mm, 50mm 60mm, 80mm, 100mm and 110mm. As it is a galvanised iron rod there is a zinc coating of up to 100 microns as per your requirements and also the coating slows down the corrosion process and can work properly for around 7- 10 years. The structure consists of two gi pipes and a plate and the gap is filled with a special kind of conductive chemical.

Advantages:

There are several advantages of using a GI or Galvanised Earthing Electrode, 

  • The cost is less than the copper electrode.

  • The corrosion process is comparatively slower than a normal iron rod.

  • It lasts for more than 7- 10 years.



Additional Information:

  • Production Capacity: 5000 Earthing Electrodes per month
  • Delivery Time: 24 hrs

View Complete details

get quote request a call back
GI Earthing Rod

GI Earthing Rod

Rs 999  / PieceGet Best Price

Minimum Order Quantity: 1 Piece

Usage/ApplicationEarthing
Country of OriginMade in India

GI earthing rod is one of the electrical products that are manufactured by Elapp Power Private Limited. Galvanised iron is used here as a primary material to construct this product. As it is a galvanised iron rod there is a zinc coating of up to 100 microns as per your requirements and also the coating slows down the corrosion process and can work properly for around 6-7 years. It is a solid rod made with gi. This rod has screws to make the earthing connection.



Additional Information:

  • Production Capacity: 5000 Earthing Rods per month
  • Delivery Time: 24 hrs

View Complete details

get quote request a call back
Electrogrip BFC IEC 62561-7 Certified

Electrogrip BFC IEC 62561-7 Certified

Rs 600  / BagGet Best Price

Minimum Order Quantity: 1 Bag

Usage/ApplicationIndustrial
BrandElectrogrip
Packaging Size11.36 Kg
Physical StatePowder
Grade StandardBio-Tech Grade
Is It Anti CorrosiveAnti Corrosive
Country of OriginMade in India
We are one of the leading suppliers and exporters of Electrogrip BFC IEC 62561-7 Certified - Ground Resistivity Enhancing Earthing Compound. We Supply best quality BFC with best price.

Electrogrip BFC as per IS:3043
Electrogrip BFC as per IEEE:80
Electrogrip BFC as per BS:7430
Electrogrip BFC as per IEC:60364-5
Electrogrip BFC as per IEC:62561-7
Electrogrip BFC as per ASTMG57-06

 

Features :-

  • Ground system to maintain constant resistance
  • Even in the dry run in all soil conditions
  • Resistance
  • Decomposition or leaching time


Additional Information:

  • Item Code: BFC03
  • Delivery Time: Depend on the order quantity
  • Packaging Details: Product Specified, Standard Packaging is done


Additional Information:

  • Production Capacity: 5000 Earthing Compound per month
  • Delivery Time: 24 hrs

View Complete details

get quote request a call back
Lightning Strike Counter Tester

Lightning Strike Counter Tester

Rs 4,999  / PieceGet Best Price

Minimum Order Quantity: 1 Piece

Usage/ApplicationIndustrial
BrandParatonex
MaterialNon-conductive plastic
Display TypeAnalog
Packaging TypePlastic Packaging
Phasesingle

The lightning strike counter tester is a testing device by Paratonex and marketed by Elapp Power Private Limited. This device checks the proper functionality of a lightning strike counter. It has a special circuit with a sensor that tests the functionality of the lightning strike counter. This device is super user friendly, you just need to insert the push pin in the specific slot on the lightning strike counter. There are two buttons on the device. Press the power button to power it on and off. After making the connection, press the testing button, it will take some time and will show the result through the indicators.


Advantages:

Lightning strike counter offers plenty of advantages such as

  • Easy to use

  • Accurate result

  • Compact size

  • Easy to handle

  • Battery operated



Additional Information:

  • Delivery Time: 24 hrs

View Complete details

get quote request a call back
Maintenance Free Earthing Electrode

Maintenance Free Earthing Electrode

Rs 1,299  / PieceGet Best Price

Minimum Order Quantity: 1 Piece

Length Of Rod2 meters
ThicknessUpto 80 Microns
Usage/ApplicationEarthing
MaterialGalvanized Iron (GI)
Diameter80 mm
Auger Hole8 - 10 inches
Terminal Hole8mm
Service Life7-10 Years
CertificationCPRI Certified
BrandElectrogrip
Country of OriginMade in India
Package ContentGI Earthing Electrode

Galvanised earthing electrodes is another Maintenence free earthing electrode manufactured by Electrogrip and Marketed by Elapp Power Private Limited. The primary material is galvanised iron, which makes it lasts longer than normal Iron. being galvanised iron, it has a zinc coating of up to 100 microns. It also cn be customised as per your requirements. There are two pipe-in-pipe with a strip and the vacant portion is filled with a special kind of conductive chemical in order to enhance the performance.

Advantages:

There are several advantages of using a GI or Galvanised Earthing Electrode, 

  • The cost is lesser than the copper electrode.

  • The corrosion process is comparatively slower than a normal iron rod.



Note: Price mentioned here are for Bulk Quantity, price may vary according to your requirement.

Additional Information:

  • Production Capacity: 5000 Earthing Electrodes per month
  • Delivery Time: 24 hrs

View Complete details

get quote request a call back
Lightning Strike Counter

Lightning Strike Counter

Rs 7,999  / PieceGet Best Price

Minimum Order Quantity: 1 Piece

Usage/ApplicationIndustrial
BrandParatonex
Model Name/NumberNirvana
MaterialPlastic
Current100 kA
Dimension16 cm *9 cm * 6 cm
Display TypeElectromechanical Display
Height6 cm
Packaging TypePlastic Wrap

Nirvana is a model of the lightning strike counter. This lightning strike counter works efficiently in order to count the number of lightning that occurred. The outer structure is made of plastic which does not allow the surge current to flow through its body. The device is also dustproof and water-resistant, so there will be no issue in case it is placed in an open environment. The electromagnetic display will show a maximum of 6 digits. With an operating temperature of 0.20 ??? +85, it is one of the most efficient lightning strike counters. It is tested with 100 kA of current. 


Advantages:

Here are the advantages of Nirvana lightning strike counter.

  • Made of plastic, no chance of getting an electrical shock.

  • Water-resistant and dustproof

  • Accurate

  • Compact design




Note: Prices mentioned here are for Bulk Quantity, the price may vary according to your requirement.

Additional Information:

  • Delivery Time: 24 hrs

View Complete details

get quote request a call back
Earthing Clamp

Earthing Clamp

Rs 199  / PieceGet Best Price

Minimum Order Quantity: 1 Piece

TypeClamps
BrandElctrogrip
MaterialBrass
ColorCopper
Usage/ApplicationEarthing
Packaging TypePlastic Wrap
Country of OriginMade in India

Elapp Power Private Limited is one of the leading sellers of earthing equipment. We offer almost all types of earth clamps. The materials that are used are of best qualities in order to offer the best purpose and make the products long lasting. These clamps are used for making connections at the time of earthing.



Additional Information:

  • Production Capacity: 5000 Clamps per month
  • Delivery Time: 24 hrs

View Complete details

get quote request a call back
FRP Mast

FRP Mast

Rs 2,499  / PieceGet Best Price
Length2 meters
Country of OriginMade in India

FRP mast is another product of lightning safety system, manufactured by Electrogrip and marketed by Elapp Power Private Limited. This mast is made of Fibre Reinforced Plastic. Due to its non-conductive property, it prevents the surge current to flow from the lightning arrester to the GI mast and saves the building from electrical hazards. After fixing the GI mast, this FRP mast along with a lightning arrester is installed inside the GI mast. Whenever a clap of lightning strikes the lightning arrester, the surge current directly flows to the ground via the ground wire to the earthing system and ends up on the earth.


Advantages:

Due to some advantages, FRP is used in the lightning protection system, such as

  • Non-conductive, i.e. does not allow current to flow through.

  • Strong and durable.

  • Has anti-corrosive property, so lasts longer

  • Very high melting point, able to withstand in extreme environments.



Additional Information:

  • Production Capacity: 5000 FRP Masts per month
  • Delivery Time: 24 hrs

View Complete details

get quote request a call back
Switching Protector Device

Switching Protector Device

Price on Request
TypeType C
PhaseThree Phase
No.of Poles3P+N
We are one of the leading suppliers of this Switching Protection Device. Manufactured using high grade raw materials and modern equipment, its functionality in providing protection against transients caused by lightning is one of the best that is available. Provided by us in the market at the best price possible, its demand is quite high.

Features:

  • High grade raw materials used
  • Provides protection against transients caused by lightning
  • Commendable functionality

View Complete details

get quote request a call back

Gi Lightning Arrester

Rs 749  / PieceGet Best Price

Minimum Order Quantity: 1 Piece

BrandElectrogrip
Model Name/NumberGILA
Country of OriginMade in India

The Galvanized Iron lightning arrester is made of galvanized iron which lasts longer than normal iron due to its anti-corrosive property. The primary material is galvanized iron and there is a coating of zinc which protects the iron from getting rust. This GI lightning arrester is designed with five spikes and spherical ball shape. The base of the lighting arrester has four holes, which are for the installation purpose. It is installed with a non-conductive part of FRP (Fibre Reinforcement Plastic) by attaching it with a mast. It offers coverage with an angle of 45 degrees from the peak of the lightning arrester, that is approximately 3 meters of the area around the lightning arrester. The area also can be increased by increasing the height of the lightning arrestor.

Advantages:

There are several advantages of using a GI lightning arrester, such as 

  • Allows the surge current to flow easily.

  • Anti-corrosive property helps to last longer.

  • With a weight of only 1.3kg, this is a piece of lightweight equipment.

  • Excellent work efficiency.

  • Protect the building from cracking and any kind of electrical hazards.

  • Easy installation.

  • Easy to assemble.


Note: Prices mentioned here are for Bulk Quantity, the price may vary according to your requirement.  

View Complete details

get quote request a call back

EXPLORE MORE CATEGORIES